10 Tips for Adjusting Your Watchband Length
Adjusting the length of a watchband is an easy process. Simply measure your wrist using either centimeters or inches, and then use that measurement to determine how much you need to snip off on all sides. The band should be lined up with the lug width and then cut to match your desired size; go to this article for more.
The article will go over ten tips for adjusting your watchband to fit properly onto your wrist. These tips are helpful when you’re down at the store is measured by a professional and if you find yourself in need of making adjustments at home or elsewhere. This is because there are always moments when we misjudge our own measurements, so these 10 tips will come in handy.
Get the right size for your wrist.
Without getting the appropriate length, you will need to make multiple cuts in order to get it just perfect. If you want to avoid this process altogether, be sure to get measured by a professional at either your local mall or jewelry store. This way, you’ll know what size smartwatch band you should buy.
Be aware of the lug width.
The body of your watchband will be connected to two ends, known as lugs. These are the parts that attach to the face of your watch in order to keep it attached securely. Before you have a band shortened or cut in order to fit your wrist, be sure that the size you choose has the same lug width as the band that came with your watch.
Snip on both sides evenly.
If you want to avoid making any unnecessary extra cuts in order to get the length just right, make sure you snip in equal amounts on both sides at once. This will ensure that the entire band is cut to the same length, and that you won’t need to make any extra adjustments after it’s been shortened.
Avoid cutting too much off at once
Even though measuring twice is good practice in most situations, you don’t want to cut your watchband in half at once! Start from one end and work your way down, snipping off a small amount from your band at a time.
Ensure that both sides are even after you have cut off a piece
After snipping off a portion of your watchband, check to ensure that both sides are even with each other. A good trick is to line up the two ends on top of each other and see how they match up. If one side is shorter than the other, you’ll have to continue making cuts until it matches up evenly with its partner.
Measure twice, cut once
As the old saying goes, measure twice and cut once! You don’t want to make multiple cuts in your band without double-checking that they’re even. The best way to ensure perfection is by cutting one side of the watchband at a time, then lining up both ends together to check that they are perfectly even with each other.
Face your watch inward once you’ve snipped it
After you have cut the length of your band down to size, ensure that it will be facing the right way once you put it onto your wrist by placing it on a flat surface. If you are left-handed, make sure that the watch’s face is on top so you can see the clock when you wear it.
Wear your band for one day to check for any slipping
Before you put away your newly shortened watchband in its new home, be sure to wear it for one full day just to prevent any slipping. This will help you determine if the length was good enough or if you will need to shorten it even more for it not to slip off of your wrist while wearing it.
Put away your watchband for at least three days before working on it again
Putting away your watchband for 3 days will allow it to go back to its original, unaltered state. This is helpful if you do happen to make any cuts that are too short because once you put it back on your wrist after this time has passed, you’ll be able to re-measure and cut off the excess again if need be.
Always remember that patience is a virtue.
Being patient with the process is important if you want to succeed at shortening your watchband! Be sure to take your time cutting off little pieces, and don’t try to rush through it. A few extra minutes can make all of the difference in the world, especially when you’re trying to make sure you get it right.
It’s always a good idea to know how your watchband size is adjusted before visiting the store. If you find that the store has shortened it, be sure to ask for help from an associate on how you can adjust it at home after purchase. We hope this blog post has helped clear some confusion about adjusting your band length,and we wish you luck in finding one that fits!